LABORATORY AND INDUSTRIAL SCALE EQUIPMENT & SERVICE

Tank Weighing

BALANCES
BAR CODE SCANNERS
BENCH SCALES
EXPLOSION PROOF
FLOOR & DRUM SCALES
INDICATORS
PRINTERS
SOFTWARE
TANK WEIGHING
TEST WEIGHTS

Tank and hopper load cell mounts for your indoor and outdoor tank/hopper weighing needs. Available in stainless steel and alloy steel. A few varieties listed below for reference. Just about any tank or hopper application can have load cells fitted. Contact our sales department for a customized quote.

RL1600 SERIES CAST IRON WEIGH MODULE

Complete Kit Includes:

  • One JB4SS NEMA Type 4X stainless steel signal trim junction box
  • Three or four RL1600 cast iron compression mounts
  • Three or four RL75016 double-ended shear beam load cells
  • 25 ft of our hostile environment EL147HE SURVIVOR® load cell cable

Standard Features:

  • Capacities (per module): 1000-25,000 lb (453.6-11,339.8 kg)
  • Cast iron construction
  • Self-checking easy-to-use design allows module to be bolted directly to tank leg without requiring additional mounting plates or load buttons
  • Environmentally protected load cells
  • Double-ended beam design, center loaded

Brochure

RL9000TWM-HT SERIES WEIGH MODULE

  • Capacities: 1000-50,000 lb
  • Very low profile design
  • 3mV/V output
  • Self-centering
  • Self-checking assembly
  • Offers 100% side load, 100% uplift and 150% safe load and 300% ultimate overload protection
  • Stainless steel construction
  • Welded seal
  • Weighs accurately with as much as a 3° on-parallel load
  • Integral 25 ft FEP cable

Brochure

RLBTM MILD/STAINLESS STEEL WEIGH MODULE

  • Capacities (per module): 500-5,000 lb SE mild steel/1,000-4,000 lb stainless steel
  • Stainless steel construction
  • Self-checking, multi-directional movement
  • Design incorporates a ball and cup for self centering
  • The RLBTM will accommodate a standard shear beam 500 lb-5,000 lb SE load cell that has a threaded load hole. RL30000, RL39123, RL35023, RL35082, RL35083.

RICE LAKE PARAMOUNTS HS MODULE KIT

Complete Kit Includes:

  • One JB4SS NEMA Type 4X stainless steel signal trim junction box
  • One fixed-pin module, one side-stop module, and one or two free-sliding assemblies. Each module is complete with a FLINTEC SB4 or SB10 (520 lb) stainless steel hermetically sealed load cell
  • 25ft of our hostile environment EL147HE SURVIVOR® load cell cable

Standard Features:

  • Capacities (per module): 520-22,500 lb (2.3 kN/102.1 kg-100 kN/10,205.9 kg)
  • Unique design allows for thermal expansion/contraction
  • Jacking screw allows empty vessel to be lifted clear of load cell for maintenance
  • Unique blind load hole eliminates unwanted side and eccentric loads
  • Vessel is free to slide laterally on PTFE-coated surfaces
  • Load cell outputs are matched to ±.0.07%, allowing replacement without further calibration

Brochure

HEAVY DUTY STAINLESS STEEL BALL AND SOCKET TANK MOUNT MODEL TBSM

Ball and Socket Mounting assembly for single ended beams w/threaded load hole, TSBSS, NSB-SS, 65023-SS, 9123. The weighing vessel will be on a top mounting plate that has a ball and socket for alignment. The ball and socket has a threaded rod that screws into the load cell. Stainless steel. Add load cell from Beam section.